ETI TempTest 2 - Smart Thermometer 360° rotating display

TempTest 2 smart thermometer with 360° rotating display and fixed probe

TempTest 2 smart thermometers incorporate a permanently attached handheld, stainless steel food penetration probe (Ø3.3 x 100 mm) and a 500 mm PVC lead. Incorporating a large, easy-to-read patented 360° rotating, digital display, it makes the ideal thermometer for both right and left-handed users. Whichever way you hold it, the display will always be the right way up! 

The TempTest gives a precise read-out of temperature over the range of -49.9 to 299.9°C with a 0.1 °C/°F resolution and an accuracy of ±0.4 °C (-49.9 to 199.9 °C). The thermometer will power off automatically after ten minutes, maximising battery life. This feature can be disabled if required.

The TempTest 2 thermometer is housed in a waterproof IP67 case with an ergonomic rubber seal, both include the Biomaster product protection to reduce bacterial growth. As well as being waterproof, the true temperature of a product can be measured in just three seconds.

Both low battery (icon) and open circuit indication are displayed, when applicable. Each TempTest 2  is powered by two AAA batteries with a minimum life expectancy of 5000 hours in normal use without the backlight. The backlight function features ETI Smart Technology - only coming on when the light level requires it. Each TempTest 2 thermometer is supplied with a permanently attached hand held, stainless steel food penetration probe (Ø3.3 x 100 mm) with fast response tip and a 500 mm PVC lead.

Different probes available

The TempTest 2 is available with two additional probe styles; surface or air. The fast response air or gas probe is an invaluable tool in establishing the correct air temperature quickly in refrigeration units, storage areas and other similar applications. |The waterproof, ribbon surface probe is particularly useful for determining the temperature of hotplates, grills, pipework etc. Please note: the accuracy and speed response of the surface probe will be dependant on flatness of surface being measured.

• Supplied with hand held, fast response penetration probe
• Patented, automatic 360° rotational display
• Small compact, waterproof (IP67) design
• Intelligent backlit display
• Meets the European Standard EN 13485
• Free traceable certificate of calibration
• UKAS 3 point certificate available